Weight: 39.57lbs, 17.95kg
Size of the base: 11.22(L)×10.236(W)×0.709(H)" (285×260×18mm)
Maximal size from vertical post to the front of base: 9.38" (238.25mm)
Horizontal bar: 19" (483mm); Diameter: 1.465" (37.2mm)
Vertical post: 15.1" (384mm); Diameter: 1.465" (37.2mm)
The size can be extended up to 25" (634mm) with extension post
Diameter of mounting holes in the front of horizontal bar: 5/8" (15.875mm)
Maximal bearing load on the front of horizontal bar: 21lbs, 9.526kg
Size of the base: 11.22(L)×10.236(W)×0.709(H)" (285×260×18mm)
Maximal size from vertical post to the front of base: 9.38" (238.25mm)
Horizontal bar: 19" (483mm); Diameter: 1.465" (37.2mm)
Vertical post: 15.1" (384mm); Diameter: 1.465" (37.2mm)
The size can be extended up to 25" (634mm) with extension post
Diameter of mounting holes in the front of horizontal bar: 5/8" (15.875mm)
Maximal bearing load on the front of horizontal bar: 21lbs, 9.526kg
MA231101 Boom Stand
MA231102 Clamp Stand
Maximal open size of clamp: 1.575" (40mm)
Weight: 22.49lbs, 10.2kg
Weight: 22.49lbs, 10.2kg
MA231108 Big Base Three Holes Boom Stand
with three of 5/8" holes for E-Arm
MA231102
MA231101
MA231108
MICROSCOPE STANDS
MA232101 Dual Arm Boom Stand
MA232101
Weight: 38.25lbs, 17.35kg
Size of the base: 11.22(L)×10.236(W)×0.709(H)" (285×260×18mm)
Maximal size from vertical post to the front of base: 9.38" (238.25mm)
Horizontal bar: 20.866" (530mm); Diameter: 0.787" (20mm)
Size of the base: 11.22(L)×10.236(W)×0.709(H)" (285×260×18mm)
Maximal size from vertical post to the front of base: 9.38" (238.25mm)
Horizontal bar: 20.866" (530mm); Diameter: 0.787" (20mm)
MA241102 76mm Pneumatic Arm
MA241102
Weight 13.89lbs, 6.3kg
Size of clamp stand: 5.52×5.12" (140×130mm)
Max. open size of clamp: 9.38" (238.25mm)
Length of horizontal arm: 9.85" (250mm)
Length of gradient arm: 14.96" (380mm)
Revolution degree: 360 degrees free revolution in horizontal direction
Maximum radius: 14.96" (380mm)
Minimum radius: 10.83" (275mm)
Raising and lowering range in vertical direction: 21.46" (545mm)
Max. opening angle in vertical direction: 6.7" (170mm)
Diameter of mounting hole in the microscope holder: 3" (76mm)
Max. bearing load on the horizontal arm:11.82lbs, 5.3kg
Size of clamp stand: 5.52×5.12" (140×130mm)
Max. open size of clamp: 9.38" (238.25mm)
Length of horizontal arm: 9.85" (250mm)
Length of gradient arm: 14.96" (380mm)
Revolution degree: 360 degrees free revolution in horizontal direction
Maximum radius: 14.96" (380mm)
Minimum radius: 10.83" (275mm)
Raising and lowering range in vertical direction: 21.46" (545mm)
Max. opening angle in vertical direction: 6.7" (170mm)
Diameter of mounting hole in the microscope holder: 3" (76mm)
Max. bearing load on the horizontal arm:11.82lbs, 5.3kg
MA242101 Flexible Arm With Table Clamp
Weight: 12.78lbs, 5.8kg
Size of clamp stand: 3.94×2.95×4.53" (100×75×115mm)
Maximal open size of clamp: 1.575" (40mm)
Length of horizontal arm: 13" (330mm)
Length of front arm: 6.7" (170mm)
Revolution degree: 360o free revolution in horizontal direction
Maximal radius: 31.89" (810mm); Minimal radius: 13" (330 mm)
Raising and lowering range in vertical direction: 19.685" (500mm)
Maximal opening angle in vertical direction: 19.7" (500mm)
Diameter of mounting hole in the front of horizontal bar: 5/8" (15.875mm)
Diameter of the mounting hole at the end of the base: 0.87" (22.2mm)
Maximal bearing load on the front of horizontal bar: 21lbs, 9.526kg
Size of clamp stand: 3.94×2.95×4.53" (100×75×115mm)
Maximal open size of clamp: 1.575" (40mm)
Length of horizontal arm: 13" (330mm)
Length of front arm: 6.7" (170mm)
Revolution degree: 360o free revolution in horizontal direction
Maximal radius: 31.89" (810mm); Minimal radius: 13" (330 mm)
Raising and lowering range in vertical direction: 19.685" (500mm)
Maximal opening angle in vertical direction: 19.7" (500mm)
Diameter of mounting hole in the front of horizontal bar: 5/8" (15.875mm)
Diameter of the mounting hole at the end of the base: 0.87" (22.2mm)
Maximal bearing load on the front of horizontal bar: 21lbs, 9.526kg
MA242101
MA231103 Heavy Base Stand
MA231103
88.18lbs Heavy Base Stand, for holding flexible arm. The size of base is 13×13×1.5"(330×330×38mm); vertical post is 15"(384mm); diameter is 1.465"(37.2mm). The size can be extended up to 25"(634mm) with extension post. The diameter of the hole for the flexible arm adapter is 22.2mm
MA23101
MA23201
MA222111
MA221201
MA224111
MA211101
MA23101 Post Stand
MA211101 76 mm Post Stand
MA221201 76mm Fine Focus Truck Stand
MA222111 76mm HF Dual Illuminated Truck Stand
MA224111 76mm HHDual Illuminated Truck Stand
MA23201 Truck Stand
76mm scope holder, Max. size from vertical post to the front of base is 205mm. The base size is 252x200x24mm, with a 95×6mm Black and White Plate and applicable to SZ and FS Series microscope
76mm scope holder, Max. size from vertical post to the front of base is 10.75"(273mm). Vertical post diameter 1.26"(32mm), vertical post height 12" (305mm). The base size is 320×305×16mm, with a 95×6mm Black and White Plate, applicable to SZ and FS Series Microscope
76mm scope holder, coaxial focus 23mm/circle, fine focus 0.56mm/circle, travel distance 250mm, vertical length 325mm. The base size is 320×305×16mm, with a 95×6mm Black and White Plate, applicable to SZ and FS Series Microscope
76mm scope holder, 12V 15W halogen bulb for top lighting, 9W 2U fluorescent lamp for bottom lighting. AC 85-265V 50/60Hz. Travel distance 250mm, vertical length 325mm. The base size is 320×305×60mm, with a 95×6mm Glass Plate, applicable to SZ and FS Series Microscope.
76mm scope holder, 12V 15W halogen bulb for top and bottom lighting. AC 85-265V 50/60Hz. Adjusable Mirror, Travel distance 250mm, vertical length 325mm. The base size is 320×305×60mm, with a 95×6mm Glass Plate, applicable to SZ and FS Series Microscope
76mm scope holder, 105mm travel distance. The base size is 280×240×25mm, with a 140×6mm plate, applicable to SZ-II Series Stereo Microscope
J.R. Instruments
Telephone 310.398.7951
Telefax 310.398.7971
Search
Scientific Optical Instruments.
Bausch & Lomb Stand
Bausch & Lomb Stand
For examination of opaque speciments
by reflected light
Scratch and reagent - resistant
contrast plate
Top port holds Nicholas Illuminator
by reflected light
Scratch and reagent - resistant
contrast plate
Top port holds Nicholas Illuminator
MA221106
MA221106 B&L Truck Stand
Vertical length 325mm. The base size is 320×305×16mm, with a 95×6mm Black and White Plate, applicable to SZ and FS Series Microscope
MA221101
MA221101 76mm Track Stand
76mm scope holder, travel distance 250mm, vertical length 325mm. The base size is 320×305×16mm, with a 95×6mm Black and White Plate, applicable to SZ and FS Series Microscope
Fits Nikon, Olympus and Leica Stereo Zoom Microscopes.
Fits all Bausch & Lomb Stereo Zoom Microsopes.
312695
312695 K-Stand
Well suited for industrial use
Requires E or ER Arm
Requires E or ER Arm